MacInsiders Logo

Similar Threads
Thread Thread Starter Forum Replies Last Post
iN Need of a poweR Supply snaps General Discussion 18 10-29-2008 06:01 PM

[Guide] Finding power on GO Trains

 
Old 11-15-2010 at 10:20 AM   #1
kevinf
Senior Member
Join Date: Feb 2008
Posts: 192

Thanked: 14 Times
Liked: 2 Times




[Guide] Finding power on GO Trains
Do you ride the GO transit train and wish it had power outlets in every car for your laptop, etc..?
I have ridden on the GO train for the past 4 years, daily since Feb 2010.

Well, you have two options:
---------------------------
There is a selection of GO trains with actual power outlets, mostly in accessibility cars (the one with the ramp).
Power outlets are on second and third floors, 4 per floor, and are pretty easy to spot.
Car numbers:
200 * car on end of train
202 * car on end of train
2007
2008
2027
2028
2037
2100 to 2119
2125
2132
2150 to 2521 * accessibility coaches
2555
if you find more not on this list, please post them!! We can create a huge database!
---------------------------
Otherwise, you can guarantee yourself an outlet (2-4 per car), on EVERY TRAIN.
Locations: second floor on the right of staircase, third floor on the left at top of staircase
*a few cars don't have any on second floor, they are mostly the older 2000 series coaches.

The connector is called: Hubbell Twist-Lock (15A, 125V), closeup picture.

You can build your own adapter for ~$20


Parts:
Male Hubbell Twist-Lock (15A, 125V) connector** 15$
1 foot 3 wire 16 gauge extension cord (or cut female end of extension cord to avoid buying below) 1$
3 wire female 125v household electrical socket 4$

** Found in electrical supply stores (note: my local Canadian Tire does not stock this part)

Assembly:
Very straightforward, all you need is a Robertson screwdriver (square head) and a pair of wire strippers/cutters.

-Strip approx 2cm of wire from both ends of the extension cord
-Open household female socket
-Each wire needs a slight bend, insert curve around screws going clockwise **
-Match the green wire with the green looking screw
-Match white wire with the shiny metal screw
-Match black wire with the dark, brass looking screw
-Repeat the above three steps for the Twist and Lock male connector.

** here is a good resource with pictures for the above steps if your not electrically sound....
http://www.hammerzone.com/archives/e...d1/replace.htm

MLC holds no responsibility for the information presented, user assumes all risk!

enjoy and if you have questions, feel free to ask.
__________________
Interested in computer gaming over LAN ? Visit http://www.maclanclub.com and sign up for mailing list, we host LAN Parties every month!

Patrick.O says thanks to kevinf for this post.



Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



McMaster University News and Information, Student-run Community, with topics ranging from Student Life, Advice, News, Events, and General Help.
Notice: The views and opinions expressed in this page are strictly those of the student(s) who authored the content. The contents of this page have not been reviewed or approved by McMaster University or the MSU (McMaster Students Union). Being a student-run community, all articles and discussion posts on MacInsiders are unofficial and it is therefore always recommended that you visit the official McMaster website for the most accurate up-to-date information.

Copyright © MacInsiders.com All Rights Reserved. No content can be re-used or re-published without permission. MacInsiders is a service of Fullerton Media Inc. | Created by Chad
Originally Powered by vBulletin®, Copyright © 2019 MH Sub I, LLC dba vBulletin. All rights reserved. | Privacy | Terms