Engineering PHysics = GEt out your cyanide!!
01-17-2011 at 02:17 PM
|
#16
|
Member
Join Date: Aug 2008
Posts: 62
Thanked:
10 Times
Liked:
34 Times
|
Eng phys is definitely not an impossible program, and since it is so unpopular they let in almost anyone with over a 4 average (at least in past years). As a result there are quite a few people there with lower averages, but so far we have very few drop outs. What everyone in first year should keep in mind is that while it is about physics, it will not likely be physics the way they imagined it. Eng phys will deal a lot more with the physics learned in 1E03 than in 1D03, plus new material dealing with quantum mechanics and semiconductors and such.
__________________
Maitland Underwood
Engineering Physics and Management IV
|
01-17-2011 at 04:03 PM
|
#17
|
Elite Member
Join Date: Aug 2008
Posts: 2,412
Thanked:
152 Times
Liked:
339 Times
|
Yup. Eng physics basically goes very indepth on development of things like semiconductors (and diodes and such i assume?) where as us in Electrical focus on how to use those components. Also, alot of 1E03 is learnt in electrical in courses like 2FH3 and 3FK4 (electromagnetics 1 and 2) and the multitude of circuit analysis courses that follow.
__________________
Electrical Engineering Alumni
|
01-17-2011 at 06:57 PM
|
#18
|
Member
Join Date: Jul 2008
Posts: 43
Thanked:
1 Time
Liked:
8 Times
|
I got into eng phys with a average in first year a little over 9. The program is a lot of work and generally your marks will drop a bunch of grade points compared to first year, but it certainly is not impossible.
|
01-17-2011 at 08:56 PM
|
#19
|
P.I.M.P
Join Date: Jul 2010
Posts: 488
Thanked:
13 Times
Liked:
63 Times
|
Quote:
Originally Posted by Geek
What else would you like to know about the program? I'm in the interdisciplinary stream, so I've taken some nuclear courses and I can try to answer questions
|
I like Physics, and I am fascinated by Quantum Mechanics. The mystery behind it is so thrilling, from tunneling to superposition to duality.
However, I do not know if I want to specialize in Photonics, nuclear or any other sub discipline.
I would also like to participate in the design of androids in some way, so I thought about Mechatronics or Electrical Engineering.
But I have heard that some graduates work in a different engineering field than what their undergrad career was based on. Is this possible ?
Do you know any tests I could take to determinate what kind of sub discipline would be best for me. I know I am not going into Software, Civil, Chemical and Materials. Mechanical is a so so so, and Mechatron is for third years.. So I guess I am left with Electrical and Engineering Physics.
|
01-17-2011 at 09:04 PM
|
#20
|
Member
Join Date: Aug 2008
Posts: 44
Thanked:
2 Times
Liked:
11 Times
|
Quote:
Originally Posted by Commander
I like Physics, and I am fascinated by Quantum Mechanics. The mystery behind it is so thrilling, from tunneling to superposition to duality.
However, I do not know if I want to specialize in Photonics, nuclear or any other sub discipline.
I would also like to participate in the design of androids in some way, so I thought about Mechatronics or Electrical Engineering.
But I have heard that some graduates work in a different engineering field than what their undergrad career was based on. Is this possible ?
Do you know any tests I could take to determinate what kind of sub discipline would be best for me. I know I am not going into Software, Civil, Chemical and Materials. Mechanical is a so so so, and Mechatron is for third years.. So I guess I am left with Electrical and Engineering Physics.
|
One key thing that you might be interested in, even though Eng Phys is about physics in general, you will be doing a lot of what you do in materials from first year. Like the silicon crystal lattice, band gap, and whatnot for semiconductor materials.
Also in Eng Phys we do a lot of circuit and electronics stuff. There are courses teaching you uses and properties of circuit components. So maybe your dream of designing androids (which will kill us all) will also be achieved via Eng Phys. Also I got a buddy in tron, it seems like it is all programming.
|
01-17-2011 at 09:21 PM
|
#21
|
Member
Join Date: Jun 2010
Posts: 52
Thanked:
1 Time
Liked:
5 Times
|
I'm also trying to decide between Mechatronics and Eng Phys mainly, possibly electrical, software, or computer. I would want to study the advanced physics in engineering physics but I'm not so sure I would want to work in a physics based job if that makes sense. So I was wondering if I could later just go for a masters in mechatronics / electrical etc. and kinda of change my career path that way. Also are the profs good ? Interesting ?
|
01-17-2011 at 09:40 PM
|
#22
|
Elite Member
Join Date: Aug 2008
Posts: 5,014
Thanked:
406 Times
Liked:
2,312 Times
|
Quote:
Originally Posted by LukeEngineer
I'm also trying to decide between Mechatronics and Eng Phys mainly, possibly electrical, software, or computer. I would want to study the advanced physics in engineering physics but I'm not so sure I would want to work in a physics based job if that makes sense. So I was wondering if I could later just go for a masters in mechatronics / electrical etc. and kinda of change my career path that way. Also are the profs good ? Interesting ?
|
I don't even know what you're asking. Master's are degrees given out at grad schools, not undergrad.. (?) You couldn't just jump in and do a master's 'later' after you have a degree in some other random discipline..
|
01-17-2011 at 09:45 PM
|
#23
|
P.I.M.P
Join Date: Jul 2010
Posts: 488
Thanked:
13 Times
Liked:
63 Times
|
Quote:
Originally Posted by RyanC
I don't even know what you're asking. Master's are degrees given out at grad schools, not undergrad.. (?) You couldn't just jump in and do a master's 'later' after you have a degree in some other random discipline..
|
I've seen people who had diploma in math and did their phd or masters in eng.
|
01-17-2011 at 09:55 PM
|
#24
|
Member
Join Date: Jun 2010
Posts: 52
Thanked:
1 Time
Liked:
5 Times
|
Quote:
I don't even know what you're asking. Master's are degrees given out at grad schools, not undergrad.. (?) You couldn't just jump in and do a master's 'later' after you have a degree in some other random discipline..
|
I know masters is grad and I heard that for eng phys masters you could have a computer / electrical / mechatronics undergrad but I'm wondering whether it works the other way but I have not been able to find any information on this if you could get into mechatronics / computer / electrical masters with an eng phy undergrad, I would assume so but not sure.
|
01-17-2011 at 09:59 PM
|
#25
|
Account Disabled by User
Join Date: May 2009
Posts: 257
Thanked:
47 Times
Liked:
98 Times
|
Quote:
Originally Posted by Commander
But I have heard that some graduates work in a different engineering field than what their undergrad career was based on. Is this possible ?
Do you know any tests I could take to determinate what kind of sub discipline would be best for me. I know I am not going into Software, Civil, Chemical and Materials. Mechanical is a so so so, and Mechatron is for third years.. So I guess I am left with Electrical and Engineering Physics.
|
In reply to the first part, it's definitely possible. I know of people who've gone to med school, worked in the nuclear industry, started graduate studies in the biomedical field, gone into business and many other things. This is in no way just related to Eng, but your undergrad degree doesn't necessarily define the rest of your career, it's sort of just a 'doorway' into a certain area. That's how I look at it anyway.
I don't know of any formal tests you take, but you don't have to pick a stream in Eng Phys. Lots of people pick the Interdisciplinary option, so you take courses from the Nuclear/Nano/Photonics streams and you can choose your technical electives according to which of those you have more of an interest in. I'm using my tech electives to take a buch of energy systems related courses, but its not hard to get courses from other Eng Departments approved as technical electives. It sort of allows you to 'focus' your Eng Phys degree without picking one of the existing streams. We'll see how well that works out when I graduate haha...
|
01-17-2011 at 10:11 PM
|
#26
|
Member
Join Date: Aug 2008
Posts: 62
Thanked:
10 Times
Liked:
34 Times
|
It's great to see interest in Eng Phys. If you guys have questions feel free to message me (and I see Geek has offered her services as well) and I would be happy to answer them. I could also answer questions regarding the management option if and of you first years are looking at that route.
__________________
Maitland Underwood
Engineering Physics and Management IV
|
01-17-2011 at 10:13 PM
|
#27
|
Elite Member
Join Date: Aug 2008
Posts: 5,014
Thanked:
406 Times
Liked:
2,312 Times
|
What does cyanide have to do with eng physics? I still don't get this.
|
01-17-2011 at 10:25 PM
|
#28
|
Member
Join Date: Jun 2010
Posts: 52
Thanked:
1 Time
Liked:
5 Times
|
Is there/What course in eng phy do you get to see/use the mcmaster nuclear reactor ? Also what other kind of equipment do you get to use ? For the Nano- and Micro-Devices option/related courses do you get to build any Nano- and Micro-Devices ? For Photonics what do you get to do with Lasers ?
|
01-17-2011 at 10:37 PM
|
#29
|
Member
Join Date: Jan 2011
Posts: 10
Thanked:
1 Time
Liked:
3 Times
|
EngPhys.... *shudders*
|
01-17-2011 at 10:45 PM
|
#30
|
Elite Member
Join Date: Aug 2008
Posts: 5,014
Thanked:
406 Times
Liked:
2,312 Times
|
Quote:
Originally Posted by LukeEngineer
Is there/What course in eng phy do you get to see/use the mcmaster nuclear reactor ? ...
|
Terrorist alert.
|
Thread Tools |
Search this Thread |
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
McMaster University News and Information, Student-run Community, with topics ranging from Student Life, Advice, News, Events, and General Help.
Notice: The views and opinions expressed in this page are strictly those of the student(s) who authored the content. The contents of this page have not been reviewed or approved by McMaster University or the MSU (McMaster Students Union). Being a student-run community, all articles and discussion posts on MacInsiders are unofficial and it is therefore always recommended that you visit the official McMaster website for the most accurate up-to-date information.
| |